More accurate electrodes will reduce leadtimes by eliminating the need for secondary processes such as polishing. Shorter leadtimes allow moldmakers to turn jobs over more quickly, driving higher volumes and better profits.

Several variables can help achieve top accuracy in electrode manufacturing, including machine tool, control system, CAM system, graphite quality and cutting tools.

 Machine Tool
There are several factors on a machine tool that can significantly impact mold building accuracy. Machine tools with a rigid design and heavy-duty cast iron construction deliver the best surface finishes because of the cut consistency achieved at all accelerations.
Reliable fixtures will add accuracy in electrode manufacturing. A well-designed fixture provides the same level of repeatability as the machine tool and holds extremely tight tolerances for fine finishing.

  Toolholders can have a direct impact on machining accuracy. Although shrink fit toolholders are more reliable for balance and run out, a pre-balanced collet holder will hold the tightest tolerances, helping achieve the finest finishes and maintain superior mold geometries.

 Control System
Another important machine tool element is the quality of its control system. A machine’s controls must be capable of processing large amounts of information quickly. Machine tools from a single-source manufacturer will ensure all elements of the control system work together for maximum speed and accuracy.

 Program look ahead also is crucial to the overall accuracy in electrode manufacturing. The program must have enough look ahead for the control to adjust acceleration/deceleration without hesitation. Without adequate look ahead, gouging or over-step can occur. Look ahead allows the program to adjust machining speed, helping achieve superior contour accuracy.

 CAM System
Software used in moldmaking is often application focused, meaning it is specifically designed for applications such as cavity design, electrode design and mold machining.
For top accuracy in electrode manufacturing, the software should be able to streamline the creation of toolpaths for fast and efficient machining, while preserving the high tolerances required in moldmaking.

 CAM systems will assess a design’s manufacturability by detecting surface overlaps, twists, holes and undercuts. This allows parting lines and surfaces to be easily modified for preservation of the mold design’s integrity.

 Graphite Quality
It is critical that the proper graphite grade be selected to meet the final mold design criteria, particularly for thin ribs and when electrode wear and metal removal rates are a consideration.

 The quality of the graphite used in moldmaking can affect electrode fabrication time, the number of electrodes needed to complete a job, EDM time, accuracy of the cavity and polishing time. Factors such as flexural strength, particle size and microstructure influence the level of detail and surface finish that can be expected in the sinker EDM operation.

  Cutting Tools
For moldmaking applications that require such high precision, quality and tolerance of the cutting tool is extremely important. A high-quality cutter will have closer tolerances on the radii on both a ball cutter and a bull nose.
Ball cutters are very versatile and therefore a good choice in these applications. They can rough and finish a wide range of materials. The tool’s shape helps achieve deep cuts and absorbs vibration to preserve accuracy.

  Bull nose cutters require fewer passes and deliver better surface finishes. Because very little pressure exists between the cutter and the graphite, these cutters work well in moldmaking by achieving thin walls and ribs and very fine stepovers.        

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them