A clear advantage a U.S. mold builder has is the ability to ‘service what you sell’. Consider the differences between a U.S. mold builder who produces 50 tools per year to an overseas manufacturer who produces 500 tools per year. Each is vying for a role with a tooling engineer for a 10-mold program. The local mold builder knows that the tools will be seen again later,

so while the P.O. is still just a glimmer in the eye, already the local toolmaker’s approach is going to include the use of quality steels and components, and he’s going to make the tools easy to service and not take any short cuts that will lead to dreaded ‘no charge fixes’.

 On the other hand, those at a faraway factory know that the mold will not be seen again, and often, despite claims of German steels and American brand components, what may actually be received can be something quite different. Often, every possible shortcut will be taken unless the mold buyer is adamant about contents and design approach. And even then, “They faked the steel certs!” has been heard.

 Even before the molds are built, this difference in mindsets shows how one moldmaker’s tools are more likely to become a good investment over time, while the other moldmaker’s are more vulnerable to becoming an expensive drain on profits.

 Having binged on chasing savings, some corporations now experienced in global mold procurement are giving greater consideration to lifetime value versus short-term cost.
Only the inexperienced mold buyer believes that two RFQs sent to two very different toolmakers are actually a comparison of two equivalent tools.

  Big Savings?
It’s been said by a U.S. mold buyer, “The price difference for equivalent tools is getting closer” between U.S. mold builders and overseas mold builders. Recently the 2 percent revaluation of the Chinese yuan has been viewed as a mostly ceremonial gesture, though a different mold buyer said, “If it goes up another 7 to 8 percent, then it would help the cause for U.S. mold builders.”

  After the economic blow of 1999-2001, U.S. mold builders that are now standing have adopted lean practices and process optimization. This reduction of time and labor has helped reduce costs, and today’s pricing may be closer than in the past.

  A mold builder in India recently said, “We used to target export molds for Europe and the U.S., but not anymore. The tooling engineers are getting more stringent, our costs are starting to go up, while European and U.S. mold builders are starting to be more competitive, eliminating the big savings. So instead, we’re moving our focus more on serving our local customers.”

  The declining dollar over the past two years has not helped European toolmakers. Low-end Asian tools also decline in price with their currency tied to the dollar, while high-end U.S. tools are more competitive to their Swiss and German counterparts.

  Full Service
Some U.S. mold builders use a full-service approach that their overseas competition can’t match, which consists of upfront input to optimize part design that can go so far as to eliminate some parts altogether within complex assemblies or simplify details to be more easily molded.

 Meanwhile, others in the U.S. manage larger tooling programs, and instead of turning down simpler tools to overseas competitors, provide an imported tool while controlling the design and continuing the customer contact. They also provide mold maintenance and are better able to react to engineering changes to the molded part. This approach contends with corporate mandates for overseas tooling while containing the negative impact.

  Confidentially Speaking
Innovation and proprietary design hold great importance to an OEM’s success or failure. Numerous stories are emerging of duplicate tools built by faraway mold builders. A local mold builder overwhelmingly holds the advantage of the trust factor. Some mold buyers don’t have the resources to police a distant toolmaker, whose great turnover rates may increase the concern.

 Not only may the product design be proprietary, but the high-end tooling for medical molds and high-speed packaging molds may transfer know-how to an OEM’s overseas competition. In effect, an OEM not being careful may cut off its own entry into a market by enabling competitors to catch up before they arrive in a market.

  Who Ya Gonna Call?
Over the life of the mold, the value of that tooling investment can be helped through a sound relationship with the mold builder, which involves communication during the program launch and part revs to be in sync with, a familiarity with the mold buyer’s past preferences, the assistance during startup and any service after startup. An informed buyer doing the math may forego the lure of seemingly cheap overseas tooling.

 With a U.S. mold builder, the mold buyer has a bigger presence with the smaller volume shop, which could prove to be salvation should any unexpected surprises occur at any time over the life of the tool. When there’s trouble, one needs to be able to reach for a friend rather than a faraway factory.                       

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them