Parts are removed either from the top or side of the mold (usually determined by cycle time). Be aware of mold obstructions—such as stack mold linkages, hot runner control cables and connectors, cooling hoses, etc.,

which could interfere with the take out robots end-of-arm-tooling. Also keep the cavities inside the tie-bar and leader pins clear of the sprue bar for unobstructed part removal.
Deep parts, like deli containers, should use an air eject system with or without a stripper plate for the fastest removal time.

  Mold open stroke also needs close attention. To remove parts with a robot requires more mold open daylight than just eject and drop. The robot mold extraction arm and end-of-arm-tooling must fit in the mold along with the part and core. A molding machine with extended tie-bars may be required to give this open dimension.                                   

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them