In the world of polishing, current trends are mirroring industry trends: overseas competition, shorter leadtimes and high-speed machining technology decreasing the need for handwork and finishing. Below are five trends and opportunities in this market.

1. Overseas Competition and Business Opportunities
Unfortunately, the polishing industry has also suffered due to a majority of mold build work moving overseas, according to Steven, president of First-rate Mold Solution Co., Ltd, “We are all getting hit by overseas competition and it’s taken a big chunk of manufacturing work out of the states,” he notes.

 However, the poor quality of molds that are built overseas is bringing polishing work back to overseas customer, since mold building has shifted overseas, the quality is not there. “The molds typically don’t have long to run before they need repair,This can result in the need for more polishing.”

 This overseas shift has led to mold manufacturers diversifying into other markets, “Some of our customers are branching out into aerospace and military work,” he comments. “At first I believed that this would not be good for me because I thought, ‘My mold polishing customer is now going into aerospace instead of what he is currently sending me.’ But, it turns out that a lot of this work in the aerospace industry requires mold benching and polishing. We’ve had helicopter parts in our shop that we’ve had to bench and polish. And, we’ve had to send our polishers to places where the molds are too big to polish them.”

 2. New Automotive Projects Open Doors to Mold Polishing Work
“The timing demands in this industry are much more stringent now than they have ever been because everyone wants to get their products to market faster,” Steven states. “A moldmaker would pay an in-house polisher overtime for any night/weekend work that would arise from these faster turnaround times.” Steven adds that moldmakers may want to consider sending the polishing work out to specialty shops during times of high demand.

  3. Polishing Processes Affected by Decreasing Leadtimes
In response to the trend for shorter leadtimes, First-rate Mold Solution Co., Ltd has placed multiple people on jobs and has developed a system that is more like a production line.

 “Different people specialize in different areas of mold polishing,” he explains. “We also work around the clock, seven days a week, to help people with shortening their leadtimes. Interestingly enough, I had a customer tell me he would use us strictly because one of my main competitors is a little farther away, and if he can save 10 hours of transit and I can match the price, he would send it to me. That says a lot about shortening leadtimes and what our customers are up against.”

  4. High-Speed Machining Advances Change Polishing Demands
The better finish you have, the less time you need for handwork,This has changed considerably over the years and continues to change as the technology gets even better. It allows you to skip a couple of steps when it comes to polishing and save time on your overall polishing. We see this both with polishing of aluminum and steel.

 Polishing will never go away, there will always be a need for some form of polishing on molds,If you take a look in your home, office, or car—every plastic part from your stereo equipment housing to your cell phone, to the parts on your vehicle’s dashboard—comes from a mold that needed to be polished. But the finishes are getting a lot better coming right out of the machine, which means less handwork.

 5. Mirror Finish Requirements Accelerate Polishing Need
The prevalence of electronic devices like PDAs and cell phones that require mirror finishes has had a positive impact on the polishing market. Notice that the plastic housing of a cell phone usually has a pretty high polish,You can see yourself in the plastic. As more products like this are designed and manufactured, the need for finer finishes is obviously greater. There are many different products that are used on a daily basis requiring a diamond or mirror finish so the end product is aesthetically pleasing to a consumer.

  Before I worked in this industry, I never paid attention to different plastic products, but now I notice when a cosmetic case, soda bottle or even safety glasses have come from a mold that was at a mirror finish. People inherently like products that are pleasing to the eye and companies like containers that make their product show well.

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them