It is up to the high-speed machining software to make the most of these components, and to drive the process for maximum benefit. To do this, the software should excel in four areas: (1) optimizing tooling stability, (2) promoting toolpath efficiency, (3) maximizing operating performance and (3) enhancing ease of use—both in programming and operations.

1. Tooling Stability
High-speed machining is often classified as high-shock machining, and for good reason. Because of its high speed, the cutter is particularly vulnerable to the shock of impact every time it sets down on a new surface. The software should therefore minimize or soften cutter impact wherever possible. For roughing, the software should drive the cutter in a spiral helix rather than a direct vertical plunge when cutting deeply or it should ramp the cutter according to the surface profile. It should carefully control cutter motion into corners, and should not permit short on-off moves in corners. It should drive the CNC machine to maintain constant weight on moving spindle heads and tooling. And it should know the complete topology of the cutting tool, to avoid accidental contact, say, between the side of the cutter and the wall of the die, something that can cause vibration.

 2. Toolpath Efficiency
The software’s ability to optimize toolpath design plays an important role in making high-speed machining effective.
For instance, the toolpath should be designed to get the maximum cutting from the largest possible tool in order to keep time and tool changes to a minimum. The toolpath design also should optimize toolpath routes to keep the cutter in contact with the material as much as possible. Minimizing fresh air cutting helps maximize the contact time of the cutter, and reduces cutter or insert wear by keeping cutter impact to a minimum. There are numerous other ways, some of which are extremely subtle, that the software does its job. One final example: when the tool does have to move from one surface to another at a sharp angle, the software should create a curved trajectory, in the air, rather than require an abrupt stop and start, in order to keep feedrates constant.

 3. Operating Performance
High-speed machining creates a performance burden on the software itself, thanks to the high-speed data feeds as well as the various toolpath algorithms. To support powerful look ahead algorithms that can anticipate tool movements and changes, and to maintain ample headroom for handling large, complex projects, the underlying software architecture must be as efficient as possible. The software should support multi-threading and parallel processing. And it should employ effective compression techniques to keep internal file sizes to a minimum.

  4. Ease of Use
High-speed machining software should promote ease of use in the conventional sense, offering contextual menus and consistent workflows, and keeping training time short. But it also should make it easy for the user to program the toolpath quickly and—important for lights-out machining—with confidence that the software will perform exactly as commanded.
Allowing users to define tools from spreadsheets or other external files is one way to simplify programming; another is to employ intelligent defaults that automate the more sophisticated aspects of the cutting—accelerating and decelerating as the cutter goes into corners, for instance. And yet another is to let the programmer create stock models to show what the mold will look like at any point in the process, in order to make any adjustments that might be required during the roughing and finishing stages. Finally, the reliability and precision of the toolpaths themselves should permit the machine operator to let the machine operate in lights-out fashion—overnight and without an attendant.                      

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them