A quality hot runner system is one of the more important enhancements you can incorporate into a mold to improve molded part quality, reduce production times and remain price competitive.

As global competition for molding plastic parts intensifies, there is tremendous pressure placed on reducing per piece molding costs. To remain competitive in this industry, you must produce a high quality product quickly, and at a competitive price.

  One of the more important enhancements you can incorporate into your mold to improve molded part quality, reduce production times, and remain price competitive is to equip it with a quality hot runner system. A hot runner-equipped mold can:
1) Lower cycle time and increase output;

2) Significantly reduce production costs; and Improve part quality. 

3) Lower Cycle Time, Increase Output

 The cycle time of any mold is largely influenced by the cooling cycle—how fast the resin can be sufficiently cooled so that the part can be ejected without permanent deformation. In any given mold, the areas that take longest to cool are those with the thickest wall section.

  Since the runner must supply multiple cavities, it is common for the runner to have a thicker wall section than the molded part . By eliminating the runner, the cooling time will be reduced by the difference in cooling time between the molded part and the cold runner.
Injection time is another component that differs between comparable hot and cold runner equipped molds. The injection time difference will be the extra time required to fill the cold runner.

  Close and open stroke of the press is extended with cold runner equipped molds. The travel must be increased to accommodate safe ejection of the cold runner.
Parts molded with hot runners better lend themselves to automated part removal. With no runner to interfere with part removal, secondary mold processing times involving manual labor, including part/runner separation, part trimming and packaging, are reduced or eliminated entirely. 

  Collectively, these individual time reductions reduce the overall molding cycle, contributing to increased output per unit of time. Depending upon the production quotas, you may be able to free up the injection molding machine for another run often days, weeks, or even months earlier than anticipated. 

    Significantly Reduce Production Costs
Although a more expensive capital investment upfront, a hot runner system is a significantly more cost-efficient means to keep production costs to a minimum over the long run.

   Resin Savings
  Since there is no cold runner to discard or recycle, resin consumption is reduced. Depending upon the molding application (i.e., medical components or parts requiring FDA approval), the product may require 100 percent virgin material—increasing overall consumption.

    Energy Savings
  Energy is wasted plasticizing, cooling and regrinding each cold runner that is produced. Increased energy consumption also is a direct result of extended cycle times.

   Labor Savings
 Secondary operations—such as manual part de-gating and trimming—are eliminated entirely with a hot runner system.

   Mold Cost Savings
  A smaller cavitation hot runner equipped mold may be able to satisfy production quotas using a smaller number of cavities since it runs at a faster cycle. The smaller mold frame size may enable installation into a smaller press.

  Injection Press Costs
 Hot runners allow reduced injection pressures during packing, as the system does not have to deal with injecting resin through a cooled runner. Melt in the cold runner may lose heat en route to the gate, possibly requiring higher heats and/or pressures from the injection molding machine. By reducing the injection pressure and clamp tonnage required, it is often possible to run the same part in a smaller tonnage machine as the clamp tonnage required is not as great.

   Improved Part Quality
 When selecting gate location (regardless of whether the tool features a cold or hot runner system), balanced and even filling of the molded part is the top priority. Cold runner gating provides the moldmaker with simplified integration in terms of selecting the optimal gate location, as the runner feeding the cavity can be more easily routed to avoid interference with mold features. Conversely, when selecting gate location with a hot runner system, the designer must consider maintaining a steel safe condition between the nozzle bore/gate detail and mold features.

  In certain situations, this may require additional work to modify the mold layout to satisfy the steel safe condition and maintain balanced/even filling. Advances in hot runner gating technologies and increasingly smaller hot runner nozzle diameters have expanded the list of gating options available to the designer, increasing the flexibility of gating options.

  Although cold runners provide the designer with simpler integration upfront, the trade off is the improved gate quality that the hot runner offers. As the part is ejected in a cold runner mold, the runner must be trimmed from part. This can occur either manually or automatically via in-mold de-gating apparatus or via a three-plate mold. The resulting vestige is evident as a small bump (imperfection) on the molded part.

  Hot runner systems provide molders with a variety of gating options that offer improved part quality relative to the cold runner alternative. Hot runner gating options fall into two main categories: thermal gating and valve gating.

   Thermal Gating
 This approach relies on the thermal properties of the tip and gate area to cause the resin to freeze (solidify) at the gate location . When the melt within the cavity has cooled sufficiently, the part is ejected and the resin at the gate location is sheared—leaving a very small gate vestige on the molded part. As well, reduced injection pressures relative to a cold runner produces a more robust part since there is less risk of molded-in stress.

   Valve Gating
  A valve stem mechanically shuts off the melt flow by making direct contact with the gate steel . The molded part separates from the gate without breaking or shearing the plastic; thus, discoloration or deformation due to gate break is unlikely. Physical properties of the molded part are improved with the use of a valve gate. Molded-in stress is a result of molecular orientation, which is caused by shear. Valve gates, due to the larger gate diameters, generate less shear compared to thermal gates. The result is a part with less warpage and better physical properties.

   Long-Term Benefits
  Despite the higher initial cost, the long-term benefits of equipping a mold with a hot runner system can be easily justified. A hot runner-equipped mold can effectively reduce molding costs without significantly increasing the complexity of the mold design. Generally, mold build leadtimes are not impacted as the hot runner is designed and manufactured in parallel with the mold.

  It is in the best interests of the moldmaker to continually suggest ways for his/her customer (the molder) to reduce mold operational costs and increase mold output. By demonstrating these initiatives, the moldmaker confirms to the molder that the moldmaker is taking an active role in increasing the molder's overall profitability, which in turn increases the likelihood of repeat business for the moldmaker. 

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them.