Employing this technology into a machine tool and spindle service program is the key to achieving overall equipment effectiveness. The right service program should utilize all available assets. It should keep a spindle running in peak condition, which allows it to maintain a high level of quality and production, through regular maintenance.

But if a spindle is serviced too often, money is lost on maintenance fees and the spindle is not used to its full potential. A good service program should make provisions for both maintenance and repair, while taking into consideration the specific operational information of each individual spindle so that service is performed according to its usage. And repairs can be predicted if the spindle's condition is constantly monitored.

  With such advanced technology available today, sadly, some mold shops' programs for maintenance and repair still lack the necessary provisions for proper service. The following five examples—ranging from nearly ludicrous to highly advanced—demonstrate the evolution of the machine tool and spindle service program.

  1. The Emergency Program
The emergency program is the panic button of repair programs. When an important spindle has broken down, sometimes the high cost of that spindle not operating necessitates an immediate response. A moldmaker who abides by the emergency program will have the spindle repaired quickly and at all costs. There are horror stories of emergency program practitioners renting a Lear Jet at the last moment to have a broken spindle flown cross-country for repair. Add the costs of the jet to the high-priority service fees paid for immediate service. While minimizing the spindle's downtime, the cost of the emergency program also minimizes its practicality.

  2. The “First In, First Out” Program
This is the no program program, where no arrangements are made for spindle maintenance, and spindles are simply brought in to a service center for repair when they break down. This program also is impractical, especially if the spindle is of any importance to the plant in which it operates. The first in, first out program can lead to extended periods of downtime, since the spindle is serviced in the order it was received. While repair is performed at normal service rates, no particular priority is given to the order. This means that a spindle could be out of commission for weeks, even months.

  3. The Scheduled Program
The scheduled program is the mark of true mediocrity. Given the spindle's past maintenance records, a regular maintenance schedule is set for the spindle. The upside to this program is that it gives ample attention to keeping the spindle in good operating condition; however, it does not take into account the spindle's fluctuating hours of operation, environmental considerations or even whether or not the spindle needs to be serviced. The majority of scheduled programs tend to be too conservative in determining the length of time a spindle can operate before it requires maintenance. While the spindle is usually kept in premium operating condition, time and money may be lost on unnecessary service.

 4. The Spindle “Hotel” Program
The spindle hotel program takes preventative measures to the extreme. Coined from a European term, the spindle hotel is an inventory of extra replacement spindles kept on site or at a designated repair facility. When one spindle breaks down, an identical spindle is retrieved from the hotel and exchanged for the broken one. The spindle hotel program works well in that downtime is limited to the actual exchange of spindles, but the effectiveness of this program comes with the high cost of keeping such a selection of replacement spindles available. The amount of capital tied up in the hotel could outweigh its convenience, and for that reason, the spindle hotel program may not always be the best choice.

  5. The Asset Efficiency Optimization Program
The asset efficiency optimization program essentially integrates a company's design, manufacturing and preventative maintenance efforts. The asset efficiency optimization program employs machine tool sensors that collect and evaluate vibration and machinery usage data.

  The data is recorded on a scheduled basis, so potential problems are predicted and repair/maintenance can be performed accordingly. The asset efficiency optimization program allows plant management to closely monitor the conditions of spindles and determine the most effective way to run their machines. This program does require an initial investment of funds for sensor equipment. But since problems are predicted, the program saves money by eliminating unnecessary routine maintenance and unanticipated downtime.

 Plants that employ an asset efficiency optimization program experience reductions of 35 percent in spindle repair costs, seven percent in scrap rate and 20 percent in their maintenance budget. Companies that use this program also experience an average spindle life extension of 25 percent and a 4.7 percent increase in uptime.

 In the manufacturing world of today, the competition is no longer just a company down the road, or even in the same hemisphere. Even if the competition was close by, there's no guarantee that a newer, faster machine will keep a facility ahead of the rest for long. And there also is no guarantee that capital funds will be available to buy that new machine when it is needed. Employing a machine tool and spindle program that monitors the machine and provides feedback for optimal performance will give a moldmaking facility an advantage.

  This advantage can be obtained regardless of the age of the machine.
The efficiency of an asset is best optimized through the application of a well-planned maintenance strategy, improved work processes and thorough use of operator input. To achieve reliability, quality and performance, shop management must develop a deep understanding of the role that each aspect of the design, operations and maintenance programs plays in optimizing plant performance in relation to reliability targets.

  The most important factor to take into consideration when choosing a spindle service program is the goals of the plant. A program that has proven itself most effective across the board will not work if it does not meet the specific requirements of the moldmaker. However, by closely monitoring the machines' performance and constructing a service program accordingly, any moldmaker can make a machine tool and spindle service program work for their plant.                          

About First-rate Mold Solution Co., Ltd.
First-rate Mold Solution Co., Ltd. in China, provide industry design,mold design,mold manufacturing,molding analysis,project management service.

 About www.firstratemold.com
our website has a lot of professional knowledges in mold industry in blog and news, also we are interested in CAD/CAM/CAE, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we welcome professional engineer,mold maker and someone who are interested in injection molding,plastic product,injection mold and mold industry to our section of blog and news,we would like to share with them